VTech erisbusinesssystem 4-line office phones main console To make a call using a corded headset

Telephone operation

Telephone operation

To make a call using a corded headset:

Make sure a corded headset is connected to the console (page 28).

1.Press HEADSET on the console.

2.Wait for a dial tone, then dial the number.

3.To hang up, press HEADSET.

To make a call using a cordless headset:

You can make a call using a registered cordless headset (see Adding and registering a cordless headset on page 26). For more details on the cordless

headset operation, refer to the IS6100 user’s manual.

1.Enter the telephone number. Press DELETE to make corrections.

2.Lift the handset or press SPEAKER to dial.

3.Press on the cordless headset.

4.To hang up, press .

On hook dialing (predialing)

1.Enter the telephone number. Press DELETE to make corrections.

2.Lift the handset or press SPEAKER to dial.

-OR-

To override automatic line selection, press LINE 1-LINE 4 for the desired line, then lift the handset.

Full-duplex speakerphone

During a call, press SPEAKER to switch between handsfree speakerphone and normal handset use. Press SPEAKER again if you are using

speakerphone or place the handset on the console to hang up.

Answering a call

Lift the handset, or press the corresponding line key (LINE 1-LINE 4), SPEAKER , HEADSET on the console or press on a registered cordless

headset to answer an incoming call.

Temporary ringer silencing

When the telephone is ringing, you can temporarily silence the ringer of the console without disconnecting the call. Press MUTE to silence the ringer. The next call rings normally at the preset volume.

49