Directory
Dial, delete or edit entries
Edit an entry
1. When a directory entry appears, press MENU/SELECT.
2. Press 
or 
to choose Edit, then press MENU/
SELECT.
3. The screen displays Enter Name. Use the dialing keys to edit the name. If you only want to edit the number, skip to step 4.
•Press DELETE to delete a character.
•Press 
/REPEAT or 
/SKIP to move the cursor to
the left or right.
4. Press MENU/SELECT to save. The screen displays Enter Number. Use the dialing keys to edit
the number.
•Press DELETE to delete a digit.
•Press 
/REPEAT or 
/SKIP to move the cursor to the left or right.
• You can include a pause while storing a dialing
sequence that requires one during actual dialing. Press 
or 
to choose Add pause, then press MENU/SELECT. A P appears on the screen.
• Store a signal for switching to temporary tone signaling. If you have dial pulse (rotary) service,
this signal is required for some special services. Press 
or 
to choose Send tone, then press
MENU/SELECT. A T appears on the screen. All numbers you enter after this will send
•You can store the flash signal required by some special services as part of a dialing sequence. Press 
or 
to choose Add flash, then press MENU/SELECT. An F appears on the screen. Continue storing the number as usual.
5.Press 
or 
to scroll to Done, then press MENU/SELECT. To exit without making changes, press CANCEL, or press 
or 
to scroll to Cancel, then press MENU/SELECT.
73
