VTech erisbusinesssystem 4-line office phones main console Telephone operation, Line indicators

Telephone operation

Telephone operation

The telephone comes programmed to select a line automatically for calls when

you do not press a line key. To override the automatic line selection setting, see Prime line on page 31 for details. When you answer a call, the telephone

automatically selects the ringing line.

Line indicators

Each of the four indicators on LINE 1-LINE 4 indicate the state of the corresponding telephone line.

•On when the corresponding line is in use.

• Flashes slowly when the line is on hold.

•Flashes rapidly when there is an incoming call on

the corresponding line.

Making and ending a call

To make a call using the console:

1.Lift the handset or press SPEAKER .

-OR-

To override automatic line selection, press LINE 1-LINE 4 for the desired line, then lift the handset.

2.Wait for a dial tone, then enter the telephone number. The screen displays the elapsed time as you talk (in hours, minutes and seconds).

L1PRIV

Line 1 00:00:01

To end a call using the console:

•Place the handset on the console to hang up.

-OR-

•Press the corresponding line key (LINE 1-LINE 4).

-OR-

•If you are using the speakerphone, press SPEAKER to hang up.

NOTE: The elapsed time is not affected by accessing services from your telephone service provider.

48