Getting started
Adding and registering a cordless handset
You can add a cordless handset (UP407, purchased separately) to your
console. The cordless handset must be registered with the UP416 console before use. When first purchased, the handset shows Choose Handset in
Registration at base menu. Put handset on cradle to register.
Make sure the cordless handset is properly installed before you begin registration. Refer to the user’s manual of the cordless handset for details. If the handset does not have enough power to proceed with the registration, you need to charge the new handset for at least five minutes.
To register an UP407 cordless handset to your UP416 console
NOTE: Register each cordless handset or headset separately.
1.Make sure the cordless handset is out of the charger and the screen shows Choose Handset in
Registration at base menu. Put handset on cradle to register.
2.On the UP416 console, press MENU/SELECT.
3.Press 
or 
to scroll to Registration and press MENU/SELECT or 
/SKIP.
4.Press MENU/SELECT again or press 
/SKIP to select Handset. The console screen shows Registering handset... (Put handset on cradle to start).
5.Place the unregistered cordless handset into the charger. The handset screen displays Registering...
Please wait. The handset beeps once and begins registering to the UP416 console. It takes up to
60 seconds to complete the registration. The UP416 console shows Handset registered and the handset shows Ext Handset. To change the
handset name and the extension number shown on the handset screen, refer to the Phone rename and Extension no. sections in the user’s manual of the cordless handset.
If the registration is not successful, the UP416 console screen returns to the previous screen. Wait for about two minutes, then try the registration process again with step 1.
Ringers
Set Date/time One Touch Phone Settings System Setup >Registration Customer Support
Registration >Handset
DECT Headset Deregistration
Registering
handset...
(Put handset on cradle to start)
25
