Xerox 4512N manual Change the baud, Rate setting, Change the data, Bit setting

U s i n g t h e C o n t r o l P a n e l

Table 3.4 Using the Control Panel to set printer operation (continued)

Task	Key Press		Action/Response	Display Shows
	Sequence†
Change the baud	On Line		Takes the printer off-line.	Printing Menu
rate setting.
	Menu		Displays the Job Menu.	Job Menu
Controls the rate at
	Menu		Displays the Config Menu.	Config Menu
which data is
transferred between
	Menu		Displays the Serial Menu (if present).	Serial Menu
the computer and the
printer through the	Item		Displays the Baud Rate item.	Baud Rate=X	*
optional serial
interface.	Up	or	Changes the baud rate setting.	Baud Rate=N
Choices:	Down
300, 600, 1200, 2400,	Enter		Saves the new value.	Baud Rate=N	*
4800, 9600, 19200,
38400, 57600	On Line		Returns the printer on-line.	PCL 5e A4/A4
Change the data	On Line		Takes the printer off-line.	Printing Menu
bit setting.
	Menu		Displays the Job Menu.	Job Menu
Controls a
	Menu		Displays the Config Menu.	Config Menu
communications
parameter for the
	Menu		Displays the Serial Menu (if present).	Serial Menu
optional serial
interface.	Item		Displays the Baud Rate item.	Baud Rate=X	*
Choices:
	Item		Displays the Data Bit item.	Data Bit=X	*
8, 7
	Up	or	Changes the data bit setting.	Data Bit=N
	Down
	Enter		Saves the new value.	Data Bit=N	*
	On Line		Returns the printer on-line.	PCL 5e A4/A4
				Table 3.4 Page 6 of 9

C h a p t e r 3 : T h e C o n t r o l P a n e l ❖ 3-13