C o n n e c t i n g t o t h e H o s t
Connecting to the Host
Rear View
1Parallel Interface
2Network port (option)
The DocuPrint 4512 can have up to two communication ports
(Figure 4). These ports allow you to connect to two distinct host systems concurrently.
Figure 4 DocuPrint 4512 input/output ports
You must supply the appropriate interface cable(s) to connect the printer to the host(s). Refer to Table 1 on page 15 for specifications.
If the printer has the Ethernet NIC option preinstalled, refer to the NIC card installation manual to initialize, configure and set up the NIC card on the printer.
Always power off the DocuPrint 4512 and the host before attaching
the printer interface cable.
Caution
14 ❖ S e t t i n g U p G u i d e
