Xerox 4512N manual Parity †, Prt Screen, Resolution, Robust XON †, St Saving †, Warn Msg

P r i n t e r P a r a m e t e r s a n d D e f a u l t S e t t i n g s

Table 3.6 Control Panel menu items, settings, and descriptions (continued)

Menu Item,
Location,	Description
Setting(s)
Parity†	Sets the parity communications parameter.
Serial Menu	Printer and host values must match.

None, Even, Odd

†Appears only when the serial interface option is installed.

Prt Screen	Controls the default symbol set to allow 80 characters per line on A4 paper.
Misc Menu	A4 paper is usually 77 characters wide. When set to 850 or 852, A4 width will
OFF, 850, 852	be able to accommodate 80 characters per line, and the default symbol set value
	will correspond to PC-850 or PC-852. This item is useful when printing the 80
	characters per line width of computer displays.
Resolution	Sets the print resolution in dpi (dots per inch).
Job Menu
600, 300
Robust XON†	Controls the XON datastream handshaking protocol. When set to On, the printer sends
Serial Menu	signals at one-second intervals to tell the host it is ready to receive data.

On, Off

†Appears only when the serial interface option is installed.

St Saving†	Controls whether or not the printer saves data in memory when switching between PCL
Job Menu	5e and Postscript emulation. When set to Off, the user area is cleared at emulation
	change.
Off, On	Setting this item to On may require more memory.
† Used only when the
PostScript option is
installed.
Warn Msg	Controls the display of memory-related warning messages. When set to On, Data Loss
Config Menu	Error and Data Memory Full messages will not be displayed.
On, Off
	Table 3.6 Page 3 of 3

C h a p t e r 3 : T h e C o n t r o l P a n e l ❖ 3-25