Xilinx Blocks
Block Parameters Dialog box
Figure
Parameters specific to the block are:
∙Force Arithmetic Type: When checked, the Output Arithmetic Type parameter can be set and the output type will be forced to the arithmetic type chosen according to the setting of the Output Arithmetic Type parameter. When unchecked, the arithmetic type of the output will be unchanged from the arithmetic type of the input.
∙Force Binary Point Position: When checked, the Output Binary Point parameter can be set and the binary point position of the output will be forced to the position supplied in the Output Binary Point parameter. When unchecked, the arithmetic type of the output will be unchanged from the arithmetic type of the input.
∙Output Arithmetic Type: The arithemetic type (unsigned or signed, 2’s complement) to which the output is to be forced.
∙Output Binary Point: The position to which the output’s binary point is to be forced. The supplied value must be an integer between zero and the number of bits in the input (inclusive).
This block does not use any hardware resources. The block does not use a Xilinx LogiCORE.
Serial to Parallel
The Serial to Parallel block takes a series of inputs of any size and creates a single output of a specified multiple of that size. The input series can be ordered either with the most significant word first or the least significant word first.
Basic Elements | 43 |