Xilinx V2.1 manual Block Parameters Dialog Box, Xilinx System Generator v2.1 Reference Guide

Models: V2.1

1 148
Download 148 pages 48.7 Kb
Page 74
Image 74
Figure 3-49: DDS block parameters dialog box

Xilinx System Generator v2.1 Reference Guide

Block Parameters Dialog Box

The block parameters dialog box can be invoked by double-clicking the icon in your Simulink model.

Figure 3-49: DDS block parameters dialog box

Parameters specific to the DDS block are:

Function: specifies the block output to be sine, cosine, or both.

Negative Sine: when checked, the sine output is negated.

Negative Cosine: when checked, the cosine output is negated.

Output Width: number of bits in the output signal; value must be between 4 and 32 inclusive.

Lookup Table Input Width: specifies the number of address bits into the Sin/Cos Lookup Table; value must be at least 3. It cannot exceed the lesser of the accumulator width and 16 (if block RAM is used), or 10 (if distributed RAM is used).

74

Xilinx Development System

Page 74
Image 74
Xilinx V2.1 Block Parameters Dialog Box, Xilinx System Generator v2.1 Reference Guide, 49:DDS block parameters dialog box