Xilinx Blocks
♦
♦
♦
♦
♦
♦
The output of the block is a
Block Parameters Dialog Box
The block parameters dialog box can be invoked by
Figure
The only parameter specific to the Relational block is:
∙Comparison Operation: specifies the comparison operation computed by the block.
Other parameters used by this block are explained in the Common Parameters section of the previous chapter.
Xilinx LogiCORE
The block uses the Xilinx LogiCORE: Comparator V5.0 if the Implement with Xilinx
The Core datasheet can be found on your local disk at:
%XILINX%\coregen\ip\xilinx\eip1\com\xilinx\ip\baseblox_v5_0\do c\compare.pdf
Math | 91 |