Chapter 17 Quality of Service (QoS)

4Displays the WLAN interface’s auto priority mapping settings.

ras> qos active on

ras> qos priq wlan enable ras> qos priq wlan set 1 1 1 ras> qos priq wlan show

===============================================================================

Interface: WLAN

[Enabled]

Auto priority mapping

[ ON]

1.

Ethernet Priority:

2.

IP Precedence:

[

ON]

3.

Packet Size:

[

ON]

===============================================================================

ras>

This example adds one WLAN class using the following settings (and then displays it).

•Class number: 1

•Class name: WLAN-class1

•Priority: auto

ras> qos class wlan mod 1 name WLAN-class1 priority auto Class setting is done.

ras> qos show class wlan 1

===============================================================================

Class 1 Name: WLAN-class1 Priority: AUTO

Route policy: NONE DSCP policy: NONE VLAN policy: NONE BW policer: NONE Filter setting: NONE

===============================================================================

ras>

This example adds a filter on the WLAN class using the following settings.

•Class number: 1

•Service: FTP

•Destination address: 172.16.1.208

•Source port: Any

•Source address: Any

•Destination address: Any

•Destination port: Any

112

 

DSL & IAD CLI Reference Guide