Chapter 5 Dial Backup Commands
The following table describes the labels in this display.
Table 11 aux netstat aux0
LABEL | DESCRIPTION |
Name | Name of the channel. |
|
|
Dev type | The type of auxillary device, there are several possibilities: |
| 0: NONE |
| 1: 56k modem |
| 2: modems other than 56k |
| 3: TA |
| 4: X25_PAD |
| 5: MultiProtocol over AAL5 |
| 6: PPP over Ethernet, |
| 7: PPTP |
|
|
Chann id | The number of the channel that the device is using. |
|
|
RX (pkt) | Received packets. |
|
|
TX (pkt) | Transmitted packets. |
|
|
RX discard | Received octets the ZyXEL Device discarded. |
|
|
TX discard | Transmitted octets the ZyXEL Device discarded. |
|
|
RX error | Received errored frames. |
|
|
TX error | Transmitted errored frames. |
|
|
RX(octet) | Received errored octects. |
|
|
TX(octet) | Transmitted errored octets. |
|
|
This example displays the dial backup port’s transmit and receive rates.
ras> | aux rate | aux0 | TX Rate | RX Rate | TX Queue |
No. | TX(byte) | Rx(byte) | |||
==== | ======== | ======== ========= ========= ========== | |||
1 | 0 | 0 | 0 | 0 | 0 |
2 | 0 | 15 | 0 | 5 | 0 |
3 | 14 | 14 | 4 | 4 | 0 |
4 | 0 | 15 | 0 | 5 | 0 |
5 | 14 | 14 | 4 | 4 | 0 |
6 | 0 | 15 | 0 | 5 | 0 |
7 | 14 | 14 | 4 | 4 | 0 |
8 | 0 | 0 | 0 | 0 | 0 |
9 | 14 | 29 | 4 | 9 | 0 |
10 | 0 | 0 | 0 | 0 | 0 |
11 | 14 | 29 | 4 | 9 | 0 |
12 | 0 | 0 | 0 | 0 | 0 |
13 | 14 | 29 | 4 | 9 | 0 |
14 | 3 | 14 | 1 | 4 | 0 |
15 | 4 | 10 | 1 | 3 | 0 |
16 | 0 | 0 | 0 | 0 | 0 |
17 | 27 | 39 | 9 | 13 | 0 |
18 | 14 | 29 | 4 | 9 | 0 |
19 | 0 | 0 | 0 | 0 | 0 |
20 | 14 | 29 | 4 | 9 | 0 |
|
|
|
|
|
|
| 39 |
DSL & IAD CLI Reference Guide | |
|
|