Chapter 15 LAN Interface Commands

Table 35 LAN Command Summary (continued)

COMMAND

DESCRIPTION

lan index <interface>

Sets the LAN interface for configuration.

 

interface: type one of the following numbers

 

• 1 - to select the main LAN interface; in CLI this

 

interface is displayed as enif0.

 

• 2 - to select IP Alias #1 interface; in CLI this interface

 

is displayed as enif0:0.

 

• 3 - to select IP Alias #2 interface; in CLI this interface

 

is displayed as enif0:1.

 

• 4 - to select the DMZ interface; in CLI this interface is

 

displayed as enif0:2.

lan ipaddr <ip> <mask>

Sets the LAN interface's IP address and subnet mask.

lan ippolicy <0-12>

Applies the specified IP policy. “0” indicates no policy is

 

applied.

 

Policies can be configured via the ip policyrouting

 

set command.

lan multicast <noneigmpv1igmpv2>

Sets the multicast mode.

lan rip <noneinoutboth>

Sets the RIP direction and mode.

<rip1rip2brip2m>

 

lan save

Saves the LAN interface configuration in the working

 

buffer to non-volatile memory. The working buffer is a

 

volatile memory space. The settings in the working buffer

 

are not applied to the ZyXEL Device until you execute

 

this command.

 

 

96

 

DSL & IAD CLI Reference Guide