
Chapter 5 Dial Backup Commands
The following table describes the labels in this display.
Table 12 aux rate aux0
LABEL | DESCRIPTION |
No. | The entry in the rate statistics. |
|
|
TX (byte) | Transmitted bypts. |
|
|
Rx (byte) | Received bytes. |
|
|
TX Rate | Transmission rate. |
|
|
RX Rate | Reiceived rate |
|
|
TX Queue | Number of packets waiting to be transmitte. |
|
|
This example displays details about the dial backup port’s signal.
ras> aux signal aux0
DTR: ON DSR: ON RTS: ON CTS: ON DCD: OFF
The following table describes the labels in this display.
Table 13 aux rate aux0
LABEL | DESCRIPTION |
DTR | Data Terminal Ready: The signal the ZyXEL Device sends to the modem to |
| indicate the ZyXEL Device is ready to receive data. |
|
|
DSR | Data Set Ready: The signal the modem sends to the ZyXEL Device to indicate the |
| modem is ready to receive data. |
|
|
RTS | Request to Send: The signal the ZyXEL Device sends to the modem to have the |
| modem prepare to receive data. |
|
|
CTS | Clear to Send: The signal the modem sends to the ZyXEL Device to acknowledge |
| the ZyXEL Device and allow the ZyXEL Device to transmit data. |
|
|
DCD | Data Carrier Detect: The signal the modem sends to the ZyXEL Device when the |
| modem has a connection with the remote device. |
|
|
40 |
| |
DSL & IAD CLI Reference Guide |
| |
|
|
|