Chapter 20 VoIP Commands
Table 50 SIP Account Command Summary
COMMAND |
| DESCRIPTION |
voice config signal | outboundkaintvl | Sets how often (seconds) the ZyXEL Device sends SIP |
<index> <seconds> |
| notify messages to the SIP server to let the server know |
|
| that a session is ongoing. |
voice config signal | stunactive <index> | Enables or disables STUN. |
<0:off1:on> |
|
|
voice config signal | stunservaddr <index> | Sets the STUN server IP Address. |
<ip> |
|
|
voice config signal | stunservport <index> | Sets the STUN server port number. |
<port> |
|
|
voice config signal ringbackactive <index> | Disables or enables early media. | |
<0:off1:on> |
|
|
voice config signal | ringbacktone <index> | Sets an early media tone. |
<tone> |
|
|
voice config signal | musiconholdactive | Disables or enables music on hold. |
<index> <0:off1:on> |
|
|
voice config signal | musiconholdtone | Sets the music on hold tone. |
<index> <tone> |
|
|
voice config signal callfwd <index> | Specifies the call forwarding table. | |
voice config signal | mixermode <index> | Sets the |
<0:Local1:Remote> |
|
|
voice config signal transafterconf <index> | Enables or disables transferring of calls from | |
<0:off1:on> |
|
|
voice config signal | rfc3263 <index> | Disables or enables support for RFC 3263 for this SIP |
<0:off1:on> |
| account. |
|
| RFC 3263 specifies how SIP proxy servers use DNS to |
|
| find remote (located in another domain) SIP proxy server |
|
| to complete SIP calls. |
|
|
|
voice config signal | featuresdisable | Disables or enables call forwarding for this SIP account. |
<index> <01> |
| Enter 1 to disable call forwarding or enter 0 to enable call |
|
| forwarding. |
voice config signal | save <index> | Saves the SIP configuration in the working buffer to non- |
|
| volatile memory. |
|
| The working buffer is a volatile memory space. The |
|
| settings in the working buffer are not applied to the |
|
| ZyXEL Device until you execute this command. |
|
|
|
voice config signal | display <index> | Displays the saved values for the SIP account. |
voice config signal | dumpCfg | Displays the configured values in the working buffer for |
|
| the specified configuration. |
voice config signal | free | Clears the working buffer for the specified configuration. |
|
| Any unsaved changes are lost. |
20.3.1 VoIP SIP Account Command Examples
This example does the following:
•specifies not to ring phone 2 when receiving a call by SIP 1 account.
•specified to ring phone 1 when receiving an coming call by SIP 1 account.
136 |
| |
DSL & IAD CLI Reference Guide |
| |
|
|
|