
Chapter 21 WAN Commands
• Displays the WAN backup configuration.
ras> wan backup load
ras> wan backup 1checkip 192.168.1.100 ras> wan backup 2checkip 192.168.1.150 ras> wan backup 3checkip 192.168.1.175 ras> wan backup checkmech icmp
ras> wan backup icmp 10 ras> wan backup tolerance 5 ras> wan backup recovery 60
ras> wan backup dialbackup active 1
ras> wan backup dialbackup ATcommand answer A0 ras> wan backup dialbackup callctl dialtimeout 20 ras> wan backup dialbackup callctl retrycount 10 ras> wan backup dialbackup portspeed 1
ras> wan backup save
save ok.
ras> wan backup display
ICMP | |
Check Mechanis: | |
Check WAN IP Address1: | 192.168.1.100 |
Check WAN IP Address2: | 192.168.1.150 |
Check WAN IP Address3: | 192.168.1.175 |
KeepAlive Fail Tolerance: | 5 |
Recovery Interval(sec): | 60 |
ICMP Timeout(sec): | 10 |
No | |
traffic Active:: | |
Backup Gateway IP Address:: | 0.0.0.0 |
Metric:: | 15 |
Yes | |
dial Active: | |
dial Port Speed:: | 9600 |
Init:: | at&fs0=0 |
AT Command Strings: | atd |
Dial:: | |
Drop:: | ~~+++~~ath |
Answer:: | A0 |
Drop DTR When Hang Up:: | No |
AT Response Strings: | NMBR = |
CLID:: | |
Called Id:: | CONNECT |
Speed:: | |
Call Control: | 20 |
Dial Timeout(sec):: | |
Retry Count:: | 10 |
Retry Interval(sec):: | 10 |
Drop Timeout(sec):: | 20 |
Call Back Delay(sec):: | 15 |
ras> |
|
| 159 |
DSL & IAD CLI Reference Guide | |
|
|