|
| Chapter 20 VoIP Commands |
Table 51 Analog Phone Command Summary |
|
|
COMMAND | DESCRIPTION | |
voice config fxs featuresdisable <index> | Disables or enables analog phone features. | |
<0~7> | ras> voice config fxs featuresdisable 1 h | |
| Use this command to configure the debug settings. | |
| This command allows you to disable or enable the | |
| following features: | |
| • | Call Waiting |
| • | Call Conference |
| • | Call Transfer |
| • | PSTN Outgoing |
| • | ISDN Outgoing |
| This is a binary data field with each bit representing a | |
| parameter, so you can control the parameters by | |
| entering decimal | |
| binary numbers. The first bit controls the Call Waiting | |
| parameter, the second bit controls Call Conference, and | |
| so on. A binary value of 1 turns a parameter on, and a | |
| binary value of 0 turns it off. | |
| Thus, if you enter 6 (00110 in binary), the following | |
| displays: | |
| Call Waiting(bit 0) disabled | |
| Call Conference(bit 1) enabled | |
| Call Transfer(bit 2) enabled | |
| PSTN Outgoing(bit 3) disabled | |
| ISDN Outgoing(bit 4) disabled | |
|
| |
voice config fxs autodialenable <index> | Disables or enables the auto dial feature. When auto dial | |
<enabledisable> | is enabled a user can press the pound key and the | |
| ZyXEL Device will try to connect to the dialed number | |
| (the ZyXEL Device does not wait for the dialing interval to | |
| timeout.) | |
|
| |
voice config fxs autodialnumber <index> | Sets a phone number for auto dialing. When the last digit | |
<phone number> | of the number entered via this command is dialed the | |
| ZyXEL Device will try to connect to this number | |
| immediately and not wait for the dialing interval timeout. | |
|
| |
voice config fxs save <index> | Saves the analog phone configuration in the working | |
| buffer to permanent memory. | |
| The working buffer is a volatile memory space. The | |
| settings in the working buffer are not applied to the | |
| ZyXEL Device until you execute this command. | |
|
| |
voice config fxs display <index> | Displays the saved values for the SIP account. | |
voice config fxs dumpCfg | Displays the configured values in the working buffer for | |
| the specified configuration. | |
voice config fxs free | Clears the working buffer for the specified configuration. | |
| Any unsaved changes are lost. | |
| 139 |
DSL & IAD CLI Reference Guide | |
|
|