Chapter 22 Wireless LAN Commands

Table 69 General Wireless Commands (continued)

COMMAND

DESCRIPTION

wlan setwmode <0~9>

Sets wireless mode.

 

0: 802.11 B/G mixed

 

1: 802.11 B only

 

2: 802.11 A only

 

4: 802.11 G only

 

6: 802.11 N only

 

7: 802.11 G/N mixed

 

8: 802.11 A/N mixed

 

9: 802.11 B/G/N mixed

 

 

wlan threshold fragment <threshold>

Sets the fragmentation threshold value.

wlan threshold rts <threshold>

Sets the RTS/CTS threshold value.

 

When G+ is enabled, the threshold is always 4096.

 

When G+ is not enabled, the threshold can be

 

0~2432.

 

 

wlan version

Displays the PCI (Peripheral Component

 

Interconnect), HAL (Hardware Abstraction Layer)

 

and IEEE 802.11 version used by the device.

 

PCI (Peripheral Component Interconnect) refers to

 

the PCI bus connecting the wireless card.

 

HAL (Hardware Abstraction Layer) refers to the

 

software that allows higher level languages to

 

interact with hardware such as a computer

 

motherboard.

 

IEEE 802.11 (or Wi-Fi) refers to a set of wireless

 

LAN technology standards.

 

 

wlan wds

Displays WDS (Wireless Distribution System)

 

settings and connection status if WDS is enabled.

wlan wds mode <01234>

Sets the WDS operating mode.

 

0: Disable to turn off WDS on the ZyXEL Device.

 

1: Restrict mode to enable WDS on the ZyXEL

 

Device.

 

2: Bridge mode to enable WDS but the ZyXEL

 

Device acts as a bridge.

 

3: Repeater mode to enable WDS but the ZyXEL

 

Device acts as a repeater.

 

4: Lazy mode to enable auto learning from the WDS

 

packets that contain the Addr4 field.

 

 

wlan wds secmode <1248>

Sets the WDS security mode.

 

1: OPEN

 

2: WEP

 

4: TKIP

 

8: AES

 

 

wlan wds add <1~4> <0:off1:on>

Adds a WDS link and sets whether the link is active

<mac> [key1] [key2] [key3] [key4]

or not.

[defaultkeyid] [psk]

If the WDS security mode is OPEN, you do not need

 

to set the key(s).

 

If the WDS security mode is WEP, you need to

 

specify four WEP keys and the default key.

 

If the WDS security mode is TKIP or AES, you need

 

to configure a pre-shared key.

186

 

DSL & IAD CLI Reference Guide