Chapter 21 WAN Commands

 

Table 62 wan atm Commands (continued)

 

 

COMMAND

DESCRIPTION

 

wan atm vchunt clear

Clears the virtual circuit configuration working

 

 

buffer.

 

wan atm vchunt display

Displays the virtual circuit hunt pool (the group of

 

 

parameters the ZyXEL Device checks for an active

 

 

VC).

 

 

 

 

wan atm vchunt remove <node#> <vpi>

Removes the entry with the specified profile

 

<vci>

number, VPI and VCI from the hunt pool.

 

 

<node#>: input the remote node index 1-8

 

 

<vpi>: VPI value

 

 

<vci>: VCI value

 

wan atm vchunt result

Displays the VC hunt result.

 

wan atm vchunt save

Saves the current setting in the virtual circuit hunt

 

 

pool working buffer to the permanent memory.

 

 

Note: Changes to the configuration in the

 

 

working buffer are not saved or

 

 

used until you enter this command.

 

 

 

 

wan atm vchunt send

Manually starts the VC auto-hunt.

 

wan atm vchunt timer <seconds>

Sets the length of time the ZyXEL Device waits

 

 

before checking the virtual circuit hunt result.

 

wan atm vchunt webRedirDis <10>

Enables or disables web redirection. Enter 1 to

 

 

disable web redirection, or enter 0 to disable it.

21.2.1 wan atm Examples

The following example:

•Enables VC hunting.

•Configures VC hunting to hunt remote node 1 with a VPI of 30 and a VCI of 33.

•Sets the ZyXEL Device to search all services.

•Displays the VC hunt parameters.

 

155

DSL & IAD CLI Reference Guide