Chapter 21 WAN Commands
21.4 wan callsch Commands
Use these commands to configure call scheduling on the ZyXEL Device.
Table 64 wan callsch Commands
COMMAND | DESCRIPTION |
wan callsch action <0:force | Sets the type of action performed by the previously- |
on1:force down2:enable | specified call schedule. |
demand3:disable |
|
wan callsch active <yesno> | Activates or deactivates the |
| schedule. |
wan callsch clear | Resets the configuration of the |
| call schedule to its default values. |
wan callsch display | Displays the current configuration of the previously- |
| specified call schedule. |
wan callsch duration <hour> <minute> | Sets the length of time the |
| schedule should remain active. |
wan callsch freeMemory | Clears the call schedule information in the working |
| buffer. |
| Note: Use this command before working |
| on another call schedule profile. |
|
|
wan callsch index <set#> | Specifies the call scheduling profile number to work |
| with. |
| Note: Use this command to specify the call |
| schedule profile before using other |
| wan callsch commands. |
wan callsch name | Sets the name of the |
| schedule. |
wan callsch oncedate <year> <month> | Sets a single date on which the |
<day> | call schedule should be in effect. |
wan callsch save | Saves the configuration of the |
| call schedule. |
| Note: Changes to the configuration in the |
| working buffer are not saved or |
| used until you enter this command. |
|
|
wan callsch startdate <year> <month> | Sets the date on which the |
<day> | schedule starts. |
wan callsch starttime <hour> | Sets the time of day at which the previously- |
<minute> | specified call schedule should become active. |
wan callsch weeklyday | Sets the day(s) of the week on which the previously- |
<MondayTuesdayWednesdayThursday | specified call schedule should be active. |
FridaySatudraySunday> |
|
<0:inactive1:active> |
|
21.4.1 wan callsch Examples
The following example:
160 |
| |
DSL & IAD CLI Reference Guide |
| |
|
|
|