Chapter 21 WAN Commands

21.6 wan node Commands

Use these commands to configure the WAN ISP and backup nodes.

Table 66 wan node Commands

COMMAND

DESCRIPTION

wan node backup <enabledisable>

Activates or deactivates the backup WAN node.

 

Note: Use the wan node index 9

 

command to specify the backup

 

WAN node.

 

 

wan node backup filter

Sets the filter action and profile to be used by the

<incomingoutgoing> <profile>

previously-specified WAN backup node.

 

incoming: the filter applies to traffic coming from

 

the WAN to the LAN.

 

outgoing: the filter applies to traffic coming from

 

the LAN to the WAN.

 

profile: profile number 1 ~ 4. Use the sys

 

filter set commands to configure filter profiles.

wan node backup idletimeout

Sets the idle timeout for the previously-specified

<seconds>

WAN backup node.

wan node backup ispname <name>

Sets the ISP name for the previously-specified WAN

 

backup node.

wan node backup metric <metric>

Sets the metric value (number of transmission hops)

 

for the previously-specified WAN backup node.

wan node backup multicast

Sets the multicast mode of the previously-specified

<noneigmpv1igmpv2>

WAN backup node.

wan node backup nailedup <onoff>

Activate or deactivate a nailed-up (always on)

 

connection for the previously-specified WAN backup

 

node.

 

 

wan node backup nat <offsuafull

Sets the Network Address Translation (NAT) mode

<address mapping rule #>>

of the previously-specified WAN backup node.

 

<off>: NAT is not active

 

<sua>: Use Single User Account only (if you have

 

just one public WAN IP address for your ZyXEL

 

Device).

 

<full> : Use full-feature NAT (if you have multiple

 

public WAN IP addresses for your ZyXEL Device).

 

<address mapping rule #> : When you choose

 

full-feature NAT, specify the address mapping rule

 

to apply. Use the ip nat addrmap rule

 

command to configure address mapping rules.

wan node backup ppp authen

Sets the authentication method for the backup WAN

<chappapboth>

node (use the wan node index 9 command to

 

specify the backup WAN node).

wan node backup ppp idletime

Sets the PPP idle timeout for the previously-

<seconds>

specified backup WAN node.

wan node backup ppp password

Sets the password for the previously-specified

<password>

backup WAN node.

wan node backup ppp username <name>

Sets the username for the backup WAN node (use

 

the wan node index 9 command to specify the

 

backup WAN node).

 

163

DSL & IAD CLI Reference Guide