Chapter 19 System Commands

Table 43 sys Command Input Values (continued)

 

LABEL

 

DESCRIPTION

 

 

rule#

 

Each set contains 6 rules. Rules are either TCP/IP or generic.

 

 

 

 

A TCP/IP based rule contains the following subfields:

 

 

 

 

Active: <yesno>

 

 

 

 

IP Protocol: <protocol#>

 

 

 

 

IP Source Route: <yesno>

 

 

 

 

Destination IP Address: <dest-ip>

 

 

 

 

Destination IP Mask: <dest-mask>

 

 

 

 

Destination port: <dest-port>

 

 

 

 

Destination port compare type: <compare-type>

 

 

 

 

Source IP Address: <dest-ip>

 

 

 

 

Source IP Mask: <dest-mask>

 

 

 

 

Source port: <dest-port>

 

 

 

 

Source port compare type: <compare-type>

 

 

 

 

TCP/IP estab: <yesno>

 

 

 

 

More: <yesno>

 

 

 

 

Log: [nonematchnotmatchboth]

 

 

 

 

Action Matched: <filter-action>

 

 

 

 

Action Not Matched: <filter-action>

 

 

 

 

A generic rule contains the following subfields:

 

 

 

 

Active: <yesno>

 

 

 

 

Offset: <offset>

 

 

 

 

Length: <length>

 

 

 

 

Mask: <data-mask>

 

 

 

 

Value: <value>

 

 

 

 

More: <yesno>

 

 

 

 

Log:[nonematchnotmatchboth]

 

 

 

 

Action Matched: <filter-action>

 

 

 

 

Action Not Matched: <filter-action>

 

 

 

 

 

 

 

 

service

 

telnetftphttphttpssnmpdnsicmp

 

 

session#

 

Refers to Temporarily Open Sessions (TOS).

 

 

 

 

 

 

 

 

set#

 

There are 12 filter sets.

 

 

 

 

 

 

 

 

ssid

 

The SSID of a wireless network.

 

 

 

 

 

 

 

 

timeout

 

This is a number between 1-65535 seconds.

 

 

 

 

 

 

 

Table 44 sys Commands

 

 

 

COMMAND

 

DESCRIPTION

 

sys adjtime

 

Retrieves the date and time from the Internet.

 

sys adminPassword <password>

Changes the administrator password.

 

sys atmu

 

Shows the multi-boot version.

 

sys atsh

 

Displays system information, including hardware and firmware

 

 

 

 

 

details.

 

sys countrycode [country-code]

Sets or displays the country code. See Table 37 on page 100 for the

 

 

 

 

 

country codes.

 

sys cpu display

 

Displays the CPU utilization.

 

sys date

 

Sets or displays the current date in year/month/date format.

 

sys datetime period [day]

 

Sets or displays the time period (in days) for how often the ZyXEL

 

 

 

 

 

Device synchronizes with the time server.

 

sys ddns config active [01]

Activates or deactivates dynamic DNS.

 

118

 

DSL & IAD CLI Reference Guide