Chapter 22 Wireless LAN Commands

Table 69 General Wireless Commands (continued)

COMMAND

 

DESCRIPTION

wcfg radius <1 ~ 8> primaryauth <IP>

Sets the primary RADIUS authentication server

<port-number><shared-secret>

settings.

<enabledisable>

 

wcfg radius <1 ~ 8> save

Saves the specified RADIUS policy.

wcfg radius <1 ~ 8> show

Displays the specified RADIUS policy settings.

wcfg radius display [1 ~ 8]

Displays the staus of all RADIUS policies or the

 

 

specified RADIUS policy.

wcfg radius saveall

Saves all RADIUS policies.

wcfg radius spdisplay [1 ~ 8]

Displays settings of all RADIUS policies or the

 

 

specified RADIUS policy before saving.

wcfg security <1 ~ 8> clear

Removes the specified security profile.

wcfg security <1 ~ 8> groupkeytime

Sets the rate at which the AP or RADIUS server

<10 ~ 65535>

sends a new group key out to all clients

wcfg security <1 ~ 8> idletime <10 ~

Sets the time interval before the ZyXEL Device

65535>

 

automatically disconnects a wireless client from the

 

 

wired network after a period of inactivity.

wcfg security <1 ~ 8> mode

Sets the security mode of the specified security

<security-mode>

profile.

 

 

security-mode:none wep wpa

 

 

wpapsk wpa2 wpa2mix wpa2psk

 

 

wpa2pskmix

wcfg security <1 ~ 8> name <policy-

Sets the name of the specified security profile.

name>

 

 

wcfg security <1 ~ 8> passphrase

Sets the passphrase for the wpapsk, wpa2psk, and

passphrase

>

wpa2pskmix security modes.

<

passphrase: Types a pre-shared key from 8 to 63

 

 

case-sensitive ASCII characters.

 

 

wcfg security <1 ~ 8> reauthtime <10

Sets how often wireless stations have to re-send

~ 65535>

 

usernames and passwords in order to stay

 

 

connected.

wcfg security <1 ~ 8> save

Saves the specified security profile.

wcfg security <1 ~ 8> show

Displays the specified security profile settings.

wcfg security <1 ~ 8> wep auth

Sets the WEP authentication method for this

<sharedauto>

security profile.

wcfg security <1 ~ 8> wep <key1 ~

Sets the WEP key used to encrypt data for this

key4> <key-string>

security profile.

 

 

key-string: Enters any 5, 13 or 16 characters

 

 

(ASCII string) or 10, 26 or 32 hexadecimal

 

 

characters ("0-9", "A-F") for a 64-bit, 128-bit or 152-

 

 

bit WEP key respectively.

 

 

wcfg security <1 ~ 8> wep keyindex

Sets a default WEP key to use for data encryption.

<1 ~ 4>

 

 

wcfg security <1 ~ 8> wep keysize

Sets the size and type of the WEP key(s) in this

<64128152> <asciihex>

security profile.

wcfg security display [1 ~ 8]

Displays the staus of all security profiles or the

 

 

specified security profile.

wcfg security saveall

Saves all security profiles.

176

 

DSL & IAD CLI Reference Guide