ZyXEL Communications n/a manual 77

	Chapter 13 IP Commands
Table 30 IP Commands (continued)
COMMAND	DESCRIPTION
ip smtp destmail [address]	Sets the destination mail address.
ip smtp srcmail [address]	Sets the source mail address.
ip smtp sendmail	Sends a mail.
ip smtp addrlist	Lists the smtp server, destination and return addresses.
ip smtp addrreset	Resets the smtp server, destination and return addresses.
ip status	Displays IP statistics counters.
ip tcp status	Displays the TCP statistics counters.
ip telnet <host-address>	Creates a Telnet connection to the specified host.
[port]
ip tftp support	Displays whether the ZyXEL Device supports TFTP.
ip tftp stats	Displays TFTP statistics coutners.
ip traceroute <host> [ttl]	Sends ICMP packets to trace the route of a remote host.
[wait] [queries]	ttl: Time to live in seconds (0-255).
	wait: Timeout in seconds (0-255).
	queries: The number of ICMP packets to use (1-5).
ip tredir active <onoff>	Enables or disables traffic redirect.
ip tredir checktime <period>	Sets the number of seconds (0-255) ZyXEL Device waits
	between attempts to connect to the target.
ip tredir disp	Displays the traffic redirect configuration.
ip tredir failcount <count>	Sets the number of times that ZyXEL Device can ping the
	target without a response before forwarding traffic to the
	backup gateway.
ip tredir partner <ip-address>	Sets the traffic redirect backup gateway IP address.
ip tredir save	Saves traffic redirect configuration.
ip tredir target <ip-address>	Sets the IP address that ZyXEL Device uses to test WAN
	accessibility.
ip tredir timeout <timeout>	Sets the maximum number of seconds (0-255) ZyXEL
	Device waits for a response from the target.
ip udp status	Displays UDP status.
ip urlfilter customize	Sets and displays the action flags.
actionFlags act(1-7)<enable/
disable>
ip urlfilter customize add	Adds the trusted, untrusted, or a keyword block with the url
[string]	string for filtering.
[trustuntrustkeyword]
ip urlfilter customize delete	Deletes the trusted, untrusted, or a keyword block with the
[string]	url string for filtering.
[trustuntrustkeyword]
ip urlfilter customize display	Displays settings for the URL filter.
ip urlfilter customize	Sets and displays the logging flags.
logFlags type<1-3>	type1: for websites do not match either custom blocked or
<enabledisable>	custom forwarded websites.
	type2: for custom blocked websites.
	type3: for custom forwarded websites.

	77
DSL & IAD CLI Reference Guide