10
VoIP DECT Commands
Use these commands to configure DECT (Digitally Enhanced Cordless Telecommunications) settings on the ZyXEL Device.
These commands are only available on ZyXEL Devices which have a DECT cordless phone base station.
10.1 Command Summary
The following section lists the commands for this feature.
Table 23 dect Command Summary
COMMAND | DESCRIPTION |
voice config dect index <index> | Loads the DECT settings for configuration. |
voice config dect bspassword | Sets the base station password. This is the password that DECT |
<index> | phones must enter when registering with the base station. |
| |
voice config dect save <index> | Saves the DECT configuration on the ZyXEL Device. |
voice config dect display <index> | Shows the base station password. |
| index: 1 |
voice dect page | Pages all handset registered with the base station on the ZyXEL |
| Device. |
voice dect reset | Resets the base station and initiates it. |
voice dect handsetlist | Displays the list of registered handsets. |
voice dect version | Displays the base station firmware version. |
voice dect upgradefw | Upgrades the base station firmware via a console. The DECT |
| upgrade should only be performed by a service technician. |
voice dect subscript | Enables DECT subscription to allow DECT phones to register with |
| the base station. |
voice dect restoredectrom | Resets the DECT module to the factory defaults. |
voice dect fwupgrade | Upgrades the base station firmware via a console. The DECT |
| upgrade should only be performed by a service technician. |
voice dect clearhandset | Removes the list of registered handsets. |
voice dect fwversion | Displays the base station firmware version. |
| 61 |
DSL & IAD CLI Reference Guide | |
|
|