15

LAN Interface Commands

Use these commands to configure LAN interfaces on the ZyXEL Device.

15.1 Command Summary

The following section lists the commands for this feature.

Table 35 LAN Command Summary

COMMAND

DESCRIPTION

lan active <yesno>

Enables or disables the LAN interface.

lan clear

Clears the working buffer for the specified configuration.

 

Any unsaved changes are lost.

lan dhcp mode <noneserverrelay>

Sets the DHCP mode.

lan dhcp relay server <ip>

Sets the IP address of the DHCP relay server.

lan dhcp server dnsserver <dns-ip1> [<dns-

Sets the IP address of the DNS server assigned to

ip2>]

DHCP clients on this interface.

lan dhcp server gateway <ip>

Sets the IP address of the default gateway assigned to

 

DHCP clients on this interface.

lan dhcp server leasetime <seconds>

Specifies how long a device can use the same IP

 

address before it needs to send a new request for an IP

 

address.

 

 

lan dhcp server netmask <netmask>

Specifies the subnet mask assigned to DHCP clients by

 

the ZyXEL Device.

lan dhcp server pool <startip> <numip>

Specifies the range of IP address for DHCP clients.

 

startip - first IP address in the IP pool.

 

numip - number of IP addresses in the IP pool.

 

 

lan dhcp server rebindtime <seconds>

Specifies the time interval from address assignment to

 

the time the client transitions to rebinding state. A client

 

in rebinding state broadcasts DHCP request messages.

 

 

lan dhcp server renewaltime <seconds>

Specifies the time interval from assigning an address

 

assignment to the time the client transitions to renewing

 

state. A client in renewing state can try to renew the IP

 

address lease.

 

 

lan display

Displays the configuration details for the LAN interface

 

being configured.

lan filter <incomingoutgoing>

Applies the specified filter set to this interface. Filter sets

<tcpipgeneric> [1] [2] [3] [4]

can be configured via the sys filter set command.

 

1-4:are the index numbers of filters configured via the

 

sys filter set command.

 

95

DSL & IAD CLI Reference Guide