Chapter 20 VoIP Commands

Table 54 Auto-Provisioning Command Summary

COMMAND

DESCRIPTION

voice config autopro save <index>

Saves the speed dial entry in the working buffer to non-

 

volatile memory.

 

The working buffer is a volatile memory space. The

 

settings in the working buffer are not applied to the

 

ZyXEL Device until you execute this command.

 

 

voice config autopro display <index>

Displays the saved values for the speed dial entry.

voice config autopro dumpCfg <index>

Displays the configured values in the working buffer for

 

the specified configuration.

20.7.1 VoIP Auto-Provisioning Command Examples

This example enables auto-provisioning on the ZyXEL Device. Specifies the IP address of the auto-provisioning server (172.16.1.201). Sets auto-provisioning to use HTTPS to transmit data and specifies which auto-provisioning file to receive by providing the phone number associated with the configuration file.

ras> voice config autopro index 1 ras> voice config autopro active 1 1

ras> voice config autopro servaddr 1 172.16.1.210 ras> voice config autopro protocol 1 2

ras> voice config autopro phonenumber 1 5555555 ras> voice config autopro save 1

20.8 VoIP PSTN Line Commands

Use these commands to configure the PSTN line on the ZyXEL Device.

Table 55 PSTN Line Command Summary

COMMAND

DESCRIPTION

voice config fxo index <index>

Selects a PSTN line index for configuration.

voice config fxo fxolongdial <index>

Sets the diallonginterval value.

<long-dial-interval>

This is the time interval (in seconds) that the ZyXEL

 

Device waits until the first digit is dialed when making a

 

call. If no digit is dialed in this time period the ZyXEL

 

Device sends a busy signal.

 

Enter a value between 0-256.

 

 

voice config fxo dtmfpausedur <index>

Sets the dialshortinterval value.

<short-dial-interval>

This is the time interval (in seconds) that the ZyXEL

 

Device waits between digits being dialed when making a

 

call. If time between dialed digits exceeds this value the

 

ZyXEL Device considers the dialing to be completed and

 

calls the number entered.

 

Enter a value between 0-256.

 

 

voice config fxo dtmfdigitdur <index>

Sets the duration of time that the ZyXEL Device sends

<dtmf-duration>

DTMF signals through the FXO interface. If this setting

 

is set to 0, then the duration becomes 500 ms.

144

 

DSL & IAD CLI Reference Guide