Chapter 20 VoIP Commands

20.6.1 VoIP Common Settings Command Examples

This example shows the country codes supported by the ZyXEL Device and selects Poland as the location of the ZyXEL Device.

ras> voice config common index 1

ras> voice config common countrycode 1 h

Please input 0 or 42 to select country!254:Default. 255: MRD

0:USA 1:JAPAN 2:TAIWAN 3: AUSTRIA 4:BELGIUM

5:BULGARIA 6:CZECH 7:DENMARK 8: FINLAND 9:FRANCE

10:HUNGARY 11:ICELAND 12:ITALY 13: LUXEMBOURG

14:NETHERLAND 15:NORWAY 16:POLAND 17: PORTUGAL

18:SLOVAKIA 19: SPAIN 20:SWEDEN 21:SWITZERLAND

22:UK 23:GERMANY 24:GREECE 25:Australia 26:New Zealand 27:Hong Kong 28:Singapore 29:Morocco 30:Ireland 31:Malaysia 32:Russia 33:Thailand 34:Israel 35:UAE 36:China 37:Ukraine 38:South Africa 39:Korea 40:Philippine 41:India 42:Turkey 254:Default 255:Issue sys default countrycode

ras> voice config common countrycode 1 16 ras> voice config common save 1

20.7 VoIP Auto-Provisioning Commands

Use these commans to configure auto-provisioning on the ZyXEL Device.

Table 54 Auto-Provisioning Command Summary

COMMAND

 

DESCRIPTION

voice config autopro

index <index>

Specifies the auto-provisioning entry for configuration.

voice config autopro

active <index>

Enables or disables this auto-provisioning entry.

<0:off1:on>

 

 

voice config autopro servaddr <index> <ip>

Sets the auto-provisioning server IP address.

voice config autopro

timeout <index>

Sets the auto-provisioning time out value. This is the

<seconds>

 

amount of time that the ZyXEL Device waits for a

 

 

response from the auto-provisioning.

voice config autopro

retry <index>

Sets the auto-provisioning retry interval. This is the

<seconds>

 

interval at which the ZyXEL Device will try to resend

 

 

messages to the auto-provisioning server if it fails to get

 

 

an acknowledgement response.

 

 

 

voice config autopro

protocol <index>

Sets the protocol for sending the auto-provisioning

<0:TFTP1:HTTP2:HTTPS>

configuration files.

voice config autopro

method <index>

Sets the method for sending auto-provisioning

<0:Common1:Bluewin2:Pincode>

configuration files.

voice config autopro

phonenumber <index>

Sets the phone number identfiying the auto-provisioning

<phonenumber>

 

request. This is only necessary if the auto-provisioning

 

 

server requires a phone number to authenticate an auto-

 

 

provisioning request.

 

 

 

voice config autopro

pincode <index>

Sets the PIN code for this auto-provisioning request. This

<pincode>

 

is only necessary if the auto-provisioning server requires

 

 

a PIN code to authenticate an auto-provisioning request.

 

143

DSL & IAD CLI Reference Guide