ZyXEL Communications n/a manual 122

Chapter 19 System Commands

Table 44 sys Commands (continued)

COMMAND	DESCRIPTION
sys logs category attack	Enables or disables recording of firewall attack logs and/or sending
[0:none1:log2:alert3:both]	an alert.
sys logs category display	Displays the log settings for the categories of logs.
	Log settings for Blocked Java can only be configured via the GUI.
sys logs category error	Enables or disables recording system errors and/or sending an alert.
[0:none1:log2:alert3:both]
sys logs category fsm	Enables or disables recording VoIP related FSM (Finite State
[0:none1:log]	Machine) logs.
sys logs category ike	Enables or disables recording IKE logs and/or sending an alert.
[0:none1:log2:alert3:both]
sys logs category ipsec	Enables or disables recording IPSec logs and/or sending an alert.
[0:none1:log2:alert3:both]
sys logs category mten	Enables or disables recording system maintenance logs.
[0:none1:log]
sys logs category pki	Enables or disables recording certificate logs and/or sending an alert.
[0:none1:log2:alert3:both]	[0:hides show debug type1:shows debug type]
sys logs category sip	Enables or disables recording SIP logs.
[0:none1:log]
sys logs category tls	Enables or disables recording TLS (HTTPS) logs and/or sending an
[0:none1:log2:alert3:both]	alert.
sys logs category traffic	Enables or disables recording traffic logs. This command is not
[0:none1:log]	available in the P-2602HWL Series.
sys logs category upnp	Enables or disables recording UPnP logs.
[0:none1:log]
sys logs category urlblocked	Enables or disables recording blocked web access logs and/or
[0:none1:log2:alert3:both]	sending an alert.
sys logs category urlforward	Enables or disables recording web forward logs.
[0:none/1:log]
sys logs clear	Clears all logs.
sys logs display	Displays all logs or specific categories of logs.
[accessattackerroripsecikej
avablockedpkimtentlsurlblock
edurlforwardupnp]
sys logs errlog clear	Clears error logs.
sys logs errlog display	Displays error logs.
sys logs errlog online	Enables or disables the error log online display.
sys logs load	Loads the log setting buffer. Use this command before you configure
	the log settings. Use sys logs save after you configure the log
	settings.
sys logs mail alertAddr [mail-	Sets the email address to which the ZyXEL Device sends alerts.
address]
sys logs mail auth	Enables or disables SMTP (Simple Mail Transfer Protocol)
<0:enable1:disable>	authentication.
sys logs mail display	Displays the settings for e-mailing logs, including the SMTP server,
	and e-mail and identification details.

122
	DSL & IAD CLI Reference Guide