Chapter 12 Firewall Commands
12.2 Command Examples
This example loads a firewall schedule for LAN to WAN firewall rule 1 and sets the schedule to apply the rule on all days of the week except Saturday and saves the schedule.
ras> | sys | firewall schedule load | 2 1 |
Schedule | Active(0=no, 1=yes): 0 | monday off | |
ras> | sys | firewall schedule week | |
Sun: 1, | Mon: 0, Tue: 1, Wed: 1, Thu: 1, Fri: 1, Sat: 1. | |
Schedule Enable All Day On. |
| |
ras> sys firewall schedule save |
| |
Save schedule successful. |
| |
ras> sys firewall acl disp 2 1 |
| |
ACL Runtime Data for ACL Set Number: 2 | ||
Number of Rules: 2 |
| |
| ACL default action (0=Drop, 1=Permit, 2=Reject): 0 | |
ICMP Idle Timeout: 0 |
| |
UDP | Idle Timeout: 0 |
|
TCP | SYN Wait Timeout: 0 |
|
TCP | FIN Wait Timeout: 0 |
|
TCP | Idle Timeout: 0 |
|
DNS | Idle Timeout: 0 |
|
Runtime Rule Number: 1 | Active (0=no, 1=yes): 0 | |
| Name: W2L_Rule_1 | |
Schedule (0=no, 1=yes): 1
Sun: 1, Mon: 0, Tue: 1, Wed: 1, Thu: 1, Fri: 1, Sat: 1. Schedule Enable All Day On.
Action (0=block, 1=permit, 2=reject): 1
Log (0=disable, 1=enable,
Alert (0=no, 1=yes): 0
Protocol: 0
Source IP Any: 1
Source IP Number of Single: 0
Source IP Number of Range: 0
Source IP Number of Subnet: 0
Dest IP Any: 1
Dest IP Number of Single: 0
Dest IP Number of Range: 0
Dest IP Number of Subnet: 0
TCP Source Port Any: 1
TCP Source Port Number of Single: 0
TCP Source Port Number of Range: 0
UDP Source Port Any: 1
UDP Source Port Number of Single: 0
UDP Source Port Number of Range: 0
TCP Dest Port Any: 0
TCP Dest Port Number of Single: 0
TCP Dest Port Number of Range: 0
UDP Dest Port Any: 0
UDP Dest Port Number of Single: 1
UDP Dest Port Number of Range: 0 Dest Port Single Port[1]: 68
ICMP Custom Service Number with only Type defined: 0
ICMP Custom Service Number with both Type and Code defined: 0
Number of User Defined IP Protocol: 0
| 69 |
DSL & IAD CLI Reference Guide | |
|
|