Chapter 22 Wireless LAN Commands

Table 69 General Wireless Commands (continued)

COMMAND

DESCRIPTION

wlan ieee8021x authendatabase

Sets the order in which the authentication

<012>

databases are consulted:

 

0: Local database only.

 

1: RADIUS only.

 

2: Local then RADIUS.

 

3: RADIUS then local.

wlan ieee8021x display

Displays wireless security information.

wlan ieee8021x dynamickeyex <012>

Sets the type of dynamic WEP key:

 

0: WEP disabled.

 

1: 64-bit WEP.

 

2: 128-bit WEP.

wlan ieee8021x idletime <seconds>

Sets the wireless security idle timeout period.

wlan ieee8021x KMprotocol

Sets the wireless security key management

<01234>

protocol.

 

0: IEEE 802.1x.

 

1: WPA.

 

2: WPA-PSK.

 

3: WPA2.

 

4: WPA2-PSK.

wlan ieee8021x load

Loads wireless security information into the working

 

buffer for configuration.

wlan ieee8021x portcontrol <012>

Sets the wireless port control configuration:

 

0: Authentication required.

 

1: No access.

 

2: No authentication.

wlan ieee8021x PSK <psk>

Sets the WPA(2)-PSK pre-shared key.

 

psk: 8~63 English keyboard characters, no spaces.

 

 

wlan ieee8021x reauthentime

Sets the re-authentication time interval.

<seconds>

 

wlan ieee8021x save

Saves the 802.1x wireless security information to

 

the permanent memory.

wlan ieee8021x wpabkuptimer

Sets the broadcast / multicast WPA key update

<seconds>

timer.

wlan ieee8021x wpamixmode

Enable or disable WPA mixed mode (WPA mixed

<0:disable1:enable>

mode allows both WPA and WPA2 clients to use the

 

same network).

wlan igmpsnoop active

Enables or disables IGMP snooping on the WLAN.

<0:Disable1:Enable>

 

wlan load

Reloads the WLAN configuration from the

 

permanent memory into the working buffer. When

 

you do this, all unsaved changes are lost.

 

 

wlan macfilter <enabledisable>

Turns the MAC address filter on or off.

wlan macfilter action <allowdeny>

Sets the MAC filter to allow or deny devices in the

 

list to associate with the ZyXEL Device.

wlan macfilter set <1~12> <mac-

Enters the specified MAC address into the MAC

address>

filter list in the specified slot.

wlan mbss <1~4> active <1:on0:off>

Enables the specified SSID profile.

 

179

DSL & IAD CLI Reference Guide