Chapter 21 WAN Commands

21.7 wan tr069 Commands

Use these commands to configure the ZyXEL Device’s TR-069 auto-configuration settings.

Table 67 wan tr069 Commands

COMMAND

DESCRIPTION

wan tr069 acsUrl <url>

Specifies the URL of the TR-069 auto-configuration

 

server.

wan tr069 active <0:no1:yes>

Activates or deactivates remote management via

 

TR-069 on the WAN.

wan tr069 debug <onoff>

Activates or deactivates TR-069 debugging.

wan tr069 display

Shows the current TR-069 configuration.

wan tr069 dump dbglog

Displays TR-069 logs.

wan tr069 dump notification

Shows the TR-069 notification parameter table.

wan tr069 dump parameters [name]

Shows a list of TR-069 notification parameters.

[NextLevel] [flag]

 

wan tr069 gateway active

Enables or disables remote management through a

<0:no1:yes>

NAT router.

wan tr069 gateway display

Shows the current TR-069 gateway status.

wan tr069 gateway notifylimit

Sets the time interval at which the gateway notifies

<seconds>

the ACS when a Device entry is added to or

 

removed from the ManageableDevice table.

 

The gateway is a NAT router between the ZyXEL

 

Device and the ACS.

 

 

wan tr069 informInterval <seconds>

Sets the frequency with which the ZyXEL Device

 

sends information to the auto-configuration server.

wan tr069 informTime <yyyy>-<mm>-

Sets the date and time at which the ZyXEL Device

<dd>T<hh>:<mm>:<ss>

sends information to the auto-configuration server.

wan tr069 load

Loads the TR-069 configuration.

wan tr069 password <password>

Sets the TR-069 password for authentication with

 

the auto-configuration server.

wan tr069 periodicEnable

Enables or disables the periodic sending of

<0:disable1:enable>

information to the auto-configuration server.

wan tr069 reqpassword <password>

Sets the TR-069 connection request password.

 

When the auto-configuration server makes a

 

connection request to the ZyXEL Device, this

 

password is used to authenticate the auto-

 

configuration server.

 

 

wan tr069 reqport <1001 ~ 65535>

Sets the port number of the TR-069 connection

 

request.

wan tr069 requsername <username>

Sets the TR-069 connection request user name.

 

When the auto-configuration server makes a

 

connection request to the ZyXEL Device, this user

 

name is used to authenticate the auto-configuration

 

server.

 

 

wan tr069 reset

Resets the TR-069 configuration to its factory

 

defaults.

wan tr069 routeRN <0 ~ 7>

Sets the remote node through which the ZyXEL

 

Device routes the TR-069 connection requests.

 

169

DSL & IAD CLI Reference Guide