5

Dial Backup Commands

Use these commands to configure dial backup port settings on the ZyXEL Device.

"At the time of writing, only P-662 series has the commands described in this chapter.

5.1Command Summary

The following table describes the values required for many dial backup commands. Other values are discussed with the corresponding commands.

Table 9 AUX Command Input Values

LABEL

DESCRIPTION

aux-port

This identifies the channel for dial backup.

 

aux0: This is the dial backup port.

 

 

The following section lists the aux commands.

Table 10 AUX Commands

COMMAND

DESCRIPTION

aux atring <aux-port>

Shows the AT command binary strings that the ZyXEL Device

 

sent to the connected modem and the responses.

aux clearstat <aux-port>

Resets channel statistics.

aux cnt disp <aux-port>

Displays the auxiliary port’s counter information.

aux cnt clear <aux-port>

Clears the auxiliary port’s counter information.

aux drop <aux-port>

Disconnects the auxiliary port’s connection.

aux init <aux-port>

Initializes the the auxiliary port’s connection.

aux mstatus <aux-port>

Displays the status of the modem’s last call.

aux mtype <aux-port>

Displays the type of modem connected to the auxiliary port.

aux netstat <aux-port>

Displays upper layer packet information and the

 

corresponding transmit and receive counts.

aux rate <aux-port>

Displays the transmit and receive rates.

aux signal <aux-port>

Displays the auxiliary port’s signal.

 

37

DSL & IAD CLI Reference Guide