
Chapter 21 WAN Commands
Table 67 wan tr069 Commands (continued)
COMMAND | DESCRIPTION |
wan tr069 save | Saves the |
| Note: Changes to the configuration in the |
| working buffer are not saved or |
| used until you enter this command. |
|
|
wan tr069 status | Displays the |
wan tr069 stun active <0:no1:yes> | Enables or disables the use of |
| STUN (Simple Traversal of User Datagram Protocol |
| (UDP) through Network Address Translators) allows |
| the ZyXEL Device to find the presence and types of |
| NAT routers and/or firewalls between it and the |
| public Internet. STUN also allows the ZyXEL Device |
| to find the public IP address that NAT assigned, so |
| the ZyXEL Device can embed it in the data stream. |
|
|
wan tr069 stun display | Shows the STUN settings. |
wan tr069 stun notifylimit <seconds> | Sets the time interval at which the ZyXEL Device |
| sends the STUN binding requests. |
wan tr069 stun srvaddr | Sets the IP address of the STUN server. |
wan tr069 stun srvport | Sets the STUN server port. |
wan tr069 stun username <username> | Sets the user name for registration with the STUN |
| server. |
wan tr069 stun password | Sets the password for registration with the STUN |
| server. |
wan tr069 stun maxkeepperiod | Sets the maximum keep alive period for which the |
| NAT binding is maintained. |
wan tr069 stun minkeepperiod | Sets the minimum keep alive period for which the |
| NAT binding is maintained. |
wan tr069 username <username> | Sets the |
| the |
21.7.1 wan tr069 Examples
The following example:
•loads the
•Sets the
•Sets the inform interval to 3600 seconds.
•Enables periodic sending of information to the
•Sets the connection request password to be "ConnReq1001".
•Sets the connection request username to be "ConnReqUser1".
•Sets the username to be "ACSauth1"
•Sets the password to be "ACSauthpass1"
•Activates
•Displays the configuration.
170 |
| |
DSL & IAD CLI Reference Guide |
| |
|
|
|