Chapter 20 VoIP Commands
Table 53 Common Settings Command Summary
COMMAND | DESCRIPTION |
voice config common ivrlanguage <index> | Specifies the language for IVR. The languages |
<0~2> | supported on your ZyXEL Device differ by model. This |
| command allows you to specify one of the languages |
| supported. |
|
|
voice config common pstnfallback <index> | Enables or disables the PSTN fallback function. When |
<0:Disable PSTN Fallback1:Enable PSTN | this function is enabled the ZyXEL Device uses the |
Fallback> | PSTN line to complete calls if a SIP account is |
| unregistered. |
voice config common sipfallback <index> | Enables or disables the SIP fallback function. When this |
<0:Disable SIP Fallback1:Enable SIP | function is enabled the ZyXEL Device uses a SIP line to |
Fallback> | complete calls if the PSTN line is not receiving a signal. |
voice config common dialmethod <index> | Sets whether the ZyXEL Device uses the European |
<0:European1:USA> | dialing method or dialing method based on the American |
| system. |
voice config common forcedialtone | Sets the ZyXEL Device to provide a dial tone even if |
<index><0:Busytone when SIP/PSTN Not | there are no SIP lines registered on the ZyXEL Device. |
Registered1:Dialtone when SIP/PSTN Not |
|
Registered> |
|
voice config common removepound <index> | Enables removing the pound (#) key as part of the dialed |
<0:not removed1:removed pound> | digits. If this function is not activated then the pound key |
| is sent along with the dialed digits when making a call. |
voice config common countrycode <index> | Sets the country code for the ZyXEL Device. Enter h as |
<countrycodeh:for help> | the country parameter to view the countries supported by |
| your ZyXEL Device. |
voice config common webdisable | Enables or disables configuring the call forwarding |
<index><0:1> | feature in the web configurator. |
voice config common save <index> | Saves the common settings entry in the working buffer to |
| |
| The working buffer is a volatile memory space. The |
| settings in the working buffer are not applied to the |
| ZyXEL Device until you execute this command. |
|
|
voice config common display <index> | Displays the saved values for the common settings entry. |
142 |
| |
DSL & IAD CLI Reference Guide |
| |
|
|
|