ZyXEL Communications n/a 2.4 UTM and myZyXEL.com

Chapter 2 Common Commands

Use the following commands for system debugging. A console port speed of 115,200 bps is necessary to view packet traces on the ZyXEL Device.

ras> sys trcpacket sw on ras> sys trcdisp brief

0 02:13:43.650 ENET1-R[0092] UDP 192.168.1.33:137->192.168.1.255:137

1 02:13:43.650 ENET1-R[0092] UDP 192.168.1.33:137->192.168.1.255:137 2 02:13:44.010 ENET1-T[0060] ARP Request 192.168.1.1->192.168.1.200 3 02:13:44.390 ENET1-R[0092] UDP 192.168.1.33:137->192.168.1.255:137 4 02:13:44.390 ENET1-R[0092] UDP 192.168.1.33:137->192.168.1.255:137 5 02:13:45.140 ENET1-R[0092] UDP 192.168.1.33:137->192.168.1.255:137 6 02:13:45.140 ENET1-R[0092] UDP 192.168.1.33:137->192.168.1.255:137

ras>

ras> sys trcdisp enif0 bothway

TIME:02:17:08.780 enet1-XMIT len:1192 call=0
0000: ff ff ff ff ff ff 00 18 f8 04 f5 67								88 a2 10 00
0010: ff ff ff 01 00 00 00 00 00 00 00 00								00 00 00 00
0020:	00 00	00 00 00	00	00 00	00	00 00	00	00	00 00 00
0030:	00 00	00 00 00	00	00 00	00	00 00	00	00	00 00 00
0040:	00 00	00 00 00	00	00 00	00	00 00	00	00	00 00 00
0050:	00 00	00 00 00	00	00 00	00	00 00	00	00	00 00 00
0030:	00 00	00 00 00	00	00 00	00	00 00	00
ras>

Use the ping command to have the ZyXEL Device ping an IP address as shown in the following example.

ras> ip ping 172.16.17.12
Resolving 172.16.17.12... 172.16.17.12				avg	mdev	max	min
sent	rcvd	rate	rtt
1	1	100	10	10	0	10	10
2	2	100	0	9	3	10	0
3	3	100	0	8	5	10	0
ras>

2.4 UTM and myZyXEL.com

Use these commands to create an account at myZyXEL.com and view what services you have activated.

"Ensure your ZyXEL Device is connected to the Internet before you use the following commands.

24
	DSL & IAD CLI Reference Guide