Chapter 19 System Commands

19.2.1Configuring Logging

1Use the sys logs load command to load the log setting buffer that allows you to configure which logs the ZyXEL Device is to record.

2Use sys logs category to view a list of the log categories.

Figure 3 Displaying Log Categories Example

ras> sys logs category

display

error

access

attack

mten

upnp

urlblocked

urlforward

anyip

 

 

 

ras>

 

 

 

3Use sys logs category followed by a log category to display the parameters that are available for the category.

Figure 4 Displaying Log Parameters Example

ras> sys logs category access

Usage: [0:none/1:log/2:alert/3:both] ras>

4Use sys logs category followed by a log category and a parameter to decide what to record.

Use 0 to not record logs for that category, 1 to record only logs for that category, 2 to record only alerts for that category, and 3 to record both logs and alerts for that category. Not every parameter is available with every category.

5Use the sys logs save command to store the settings in the ZyXEL Device (you must do this in order to record logs).

19.2.2Displaying Logs

•Use the sys logs display command to show all of the logs in the ZyXEL Device’s log.

•Use the sys logs category display command to show the log settings for all of the log categories.

•Use the sys logs display [log category] command to show the logs in an individual ZyXEL Device log category.

•Use the sys logs clear command to erase all of the ZyXEL Device’s logs.

 

129

DSL & IAD CLI Reference Guide