Chapter 20 VoIP Commands
20.2.1 VoIP Relay to PSTN Command Examples
This example displays the PSTN prefix numbers configured on the ZyXEL Device.
ras> voice config pstn display | flags | ||
index | PhoneNumber | ||
| |||
1 | 7878 | 7 |
|
2 | 3434 | 4 |
|
3 | 0 |
|
|
4 | 5 |
|
|
5 | 0 |
|
|
6 | 0 |
|
|
7 | 0 |
|
|
8 | 0 |
|
|
9 | 0 |
|
|
10 | 0 |
|
|
he following table describes the labels in this screen.
Table 49 voice config pstn display
LABEL | DESCRIPTION | |
index | This is the number of a PSTN prefix number entry. | |
|
| |
PhoneNumber | This is the prefix number associated with the entry. | |
|
| |
flags | This field displays one of the following entries | |
| • 0 | - if this index entry has not been configured. |
| • 7 | - if the prefix code is turned on, phone number activated and |
| configured. | |
| • 4 | - if the prefix code is turned off, phone number not activated or |
| configured. | |
|
|
|
20.3 VoIP SIP Account Commands
Use these commands to configure SIP accounts on the ZyXEL Device.
Table 50 SIP Account Command Summary
COMMAND |
| DESCRIPTION |
voice config signal | index <index> | Specifies the SIP account you want to configure. |
voice config signal | active <index> | Activates (1) or deactivates (0) this SIP account. |
<0:off1:on> |
|
|
voice config signal | registertimeout | Sets the SIP registration timeout value for this SIP |
<index> <seconds> |
| account. (default 3600 sec) |
voice config signal | registerresendtime | Sets the number of seconds the ZyXEL Device waits to |
<index> <seconds> |
| resend a registration request if a previous request failed |
|
| or there was no response. |
voice config signal | sessiontimerActive | Activates (1) or deactivates (0) a SIP session timer for |
<index> <0:off1:on> |
| this SIP account. |
voice config signal sessiontimeout <index> | Sets the number of seconds a conversation can last | |
| before the call is automatically disconnected. (default | |
|
| 300 sec) |
| 133 |
DSL & IAD CLI Reference Guide | |
|
|