ZyXEL Communications n/a manual 138

Chapter 20 VoIP Commands

Table 51 Analog Phone Command Summary

COMMAND	DESCRIPTION
voice config fxs fax <index> <01>	Sets how the ZyXEL Device handles fax messages.
	0: The ZyXEL Device uses G.711 to send fax messages.
	1: The ZyXEL Device sends fax messages as UDP or
	TCP/IP packets through IP networks. This method is also
	referred to as T.38 relay.
voice config fxs callwaitingtime <index>	Sets the call waiting time.
<time>
voice config fxs cidtype <index> <0:During	Sets whether the ZyXEL Device displays the caller ID
Ring 1: Prior Ring>	priror to or during ringing when calls come in.
voice config fxs cidfirsttastype <index>	Sets the first TAS (Terminal Alerting Signal) parameter.
<0123>	TASspecifiesthemethodtoalertthereceiverthatdatais
	forthcoming. The possible methods are:
	• 0: NULL
	• 1: DT-AS (Dual Tone Alerting Signal)
	• 2: RP-AS (Ringing Pulse Alrting Signal)
	• 3: Line reversal followed by DT-AS
	This command executes automatically when a
	countrycode is selected. It adjusts the settings for caller
	ID to work in different geographic locations.
voice config fxs cidsecondtastype <index>	Sets the second TAS parameter.
<0:NULL1:DT-AS2:RP-AS>	This command executes automatically when a
	countrycode is selected. It adjusts the settings for caller
	ID to work in different geographic locations.
voice config fxs cidpayload <index>	Sets the DTMF payload type.
<0:FSK1:DTMF>	This command executes automatically when a
	countrycode is selected. It adjusts the settings for caller
	ID to work in different geographic locations.
voice config fxs firsttastoint <index>	Sets the first TAS timeout interval.
<0~65535>	This command executes automatically when a
	countrycode is selected. It adjusts the settings for caller
	ID to work in different geographic locations.
voice config fxs sectastoint <index>	Sets the second TAS timeout interval.
<0~65535>	This command executes automatically when a
	countrycode is selected. It adjusts the settings for caller
	ID to work in different geographic locations.
voice config fxs firstringtoint <index>	Sets the CID ring timeout interval.
<0~65535>	This command executes automatically when a
	countrycode is selected. It adjusts the settings for caller
	ID to work in different geographic locations.
voice config fxs cidringtimeout <index>	Sets call id ring timeout. This command generates extra
<0~65535 msec>	200 ms delay. For example, if you set the value to 0 ms,
	the actual value is 200 ms and if you set the value to 200
	ms, then the actual value is 400 ms.
	This command executes automatically when a
	countrycode is selected. It adjusts the settings for caller
	ID to work in different geographic locations.
voice config fxs ciddtasacktimeout <index>	Sets the TAS acknowledgement time out value (in
<100~500>	miliseconds).
	This command executes automatically when a
	countrycode is selected. It adjusts the settings for caller
	ID to work in different geographic locations.

138
	DSL & IAD CLI Reference Guide