Chapter 20 VoIP Commands

Table 50 SIP Account Command Summary

 

COMMAND

 

DESCRIPTION

voice config

signal phoneselect <index>

Sets the physical FXS port mapping to this SIP account

<phone-port0:All> <0:No1:Yes>

for incoming calls. In other words, specifies which analog

 

 

phone rings when a call is received for this SIP account.

 

 

phone-port: this is an FXS port on the ZyXEL Device.

 

 

Enter 0 to select all FXS ports.

 

 

 

voice config

signal vlantag <index>

Enables or disables VLAN tags in VoIP packets.

<disableenable>

 

voice config

signal tpid_vlantag <index>

Sets the value of the TPID (Tag Protocol Identifier) in the

<tpid>

 

VLAN tag header of VoIP packets.

voice config

signal vid_vlantag <index>

Sets the VLAN ID of VoIP packets sent via this SIP

<vlan-id>

 

account.

voice config

signal priority_vlantag

Sets the VLAN priority value of outgoing VoIP packets.

<index> <priority:0-7>

 

voice config

signal diffservrtp <index>

Sets the DiffServ value in the IP header of outgoing RTP

<0-255>

 

packets for this SIP account.

voice config

signal diffservsip <index>

Sets the DiffServ value in the IP header of outgoing SIP

<0-255>

 

packets for this SIP account.

voice config

signal mwiactive <index>

Enables or disables the message waiting indication.

<0:off1:on>

 

 

voice config signal mwitimeout <index>

Sets the MWI time out value.

<minutes>

 

 

voice config signal rfc3325 <index><1:

Enables or disables the sending of identity information

privacy call

using RFC3325, 0: privacy

between SIP devices as described in RFC 3325.

call using draft-01>

 

voice config

signal prack <index>

Enables or disables sending of PRACK messages as

<0:off1:on>

 

described in RFC 3262 for this SIP account.

voice config signal fakesipactive <index>

Enables a fake SIP service for this SIP account.

<0:off1:on>

 

This feature is used by ZyXEL Devices which are behind

 

 

a NAT router that does not support SIP ALG.

 

 

If a ZyXEL Device has a private IP address on its WAN

 

 

interface, then it may have to provide a public IP address

 

 

along with a listening port of the Internet gateway (for

 

 

example a DSL modem) to which it is connected. This

 

 

fake IP address and port number ensure that SIP

 

 

packets are successfully routed back to the ZyXEL

 

 

Device from the Internet.

 

 

 

voice config

signal fakesipservaddr

Sets a fake SIP server address for this SIP account.

<index> <ip>

 

 

voice config

signal fakesipservport

Sets a fake SIP server port for this SIP account.

<index> <port>

 

voice config signal outboundactive <index>

Enables or disables a SIP outbound proxy configuration

<0:off1:on>

 

for this SIP account.

voice config

signal outboundaddr <index>

Sets the address of the SIP outbound proxy server.

<ip>

 

 

voice config

signal outboundport <index>

Sets the port number of the SIP outbound proxy server.

<port>

 

 

voice config

signal outboundkaactive

Enables or disables NAT keep alive service.

<index> <0:off1:on>

 

 

135

DSL & IAD CLI Reference Guide