
| Chapter 20 VoIP Commands |
Table 55 PSTN Line Command Summary |
|
COMMAND | DESCRIPTION |
voice config fxo fxoflashmin <index> | Sets the fxo flash key min interval value (miliseconds). |
The flash key being pressed is only recognized by the | |
| ZyXEL Device if it is pressed for a longer period than the |
| flash key min interval but a shorter period than the flash |
| key max interval. |
|
|
voice config fxo fxoflashmax <index> | Sets the fxo flash key max interval value (miliseconds). |
The flash key being pressed is only recognized by the | |
| ZyXEL Device if it is pressed for a longer period than the |
| flash key min interval but a shorter period than the flash |
| key max interval. |
|
|
voice config fxo fxophselect <index> | Specifies which telephones should receive calls via the |
PSTN line. | |
voice config fxo save <index> | Saves the PSTN line configuration entry in the working |
| buffer to |
| The working buffer is a volatile memory space. The |
| settings in the working buffer are not applied to the |
| ZyXEL Device until you execute this command. |
|
|
voice config fxo display | Displays the saved values for the PSTN line |
| configuration entry. |
voice config fxo dumpCfg | Displays the configured values in the working buffer for |
| the specified configuration. |
20.8.1 VoIP PSTN Line Command Examples
This example sets all telephones connected to the ZyXEL Device to receive calls via the PSTN line.
ras> voice config fxo index 1
ras> voice config fxo fxophselect 1 0 1 ras> voice config fxo save 1
20.9 VoIP Call Forwarding Commands
Use these commands to configure
Table 56
COMMAND | DESCRIPTION |
voice config forward index <index> | Specifies the |
voice config forward unconditional <index> | Specifies the phone number to which the ZyXEL Device |
forwards all incoming calls. | |
voice config forward busy <index> <phone- | Specifies the phone number to which the ZyXEL Device |
number> | forwards incoming calls when the phone port is busy. |
voice config forward noanswer <index> | Specifies the phone number to which the ZyXEL Device |
forwards incoming calls when the call goes unanswered | |
| for a period of time you specify in the voice config |
| forward noanstime command. |
voice config forward noanstime <index> | Sets the amount of time the ZyXEL Device waits before it |
<seconds> | considers a call unanswered. |
| 145 |
DSL & IAD CLI Reference Guide | |
|
|