ZyXEL Communications n/a manual 185

Chapter 22 Wireless LAN Commands

Table 69 General Wireless Commands (continued)

COMMAND	DESCRIPTION
wlan resetcount <1>	Removes wirelsss statistics.
wlan restart	Resets the wireless driver on the ZyXEL Device.
wlan rtsThreshold <256~2346>	Sets the RTS threshold value.
	When IEEE802.11g is enabled, the threshold is
	always 4096.
	When IEEE802.11g is not enabled, the threshold
	can be 0~2432.
wlan save	Saves all wireless settings to the permanent
	memory.
wlan scan	Scans for a channel which is not used by another
	device.
wlan setautochan <01>	Disables or enables auto channel selection.
	0: Disable
	1: Enable
wlan setbeaconperiod <20~1024>	Sets a time interval in milisecond to specify how
	often the ZyXEL Device broadcasts the SSID.
wlan setchannel <1~14>	Sets the wireless channel depending on your
	region.
wlan setdisasssta <mac>	Disconnects a specified wireless client.
wlan setfragthr <256~2346>	Sets the maximum data fragment size that can be
	sent.
wlan setled <01>	Turns on or off the WLAN LED.
	0: OFF
	1: ON
wlan setnoforbssid <01>	Allows or disallows traffic forwarding between
	different BSSs.
	0: Disable
	1: Enable
wlan setradio <01>	Disables or enables the radio.
	0: Off
	1: On
wlan setrtsthr <1~2347>	Sets the RTS threshold.
wlan setsitesurvey <1>	Issues a site survey command to the WLAN driver.
wlan settxburst <01>	Disables or enables transmission burst.
	0: Disable
	1: Enable
wlan settxpower <1 ~ 100>	Sets the output power of the ZyXEL Device.
wlan settxpream <012>	Sets the preamble type.
	0: Long Preamble
	1: Short Preamble
	2: Auto

	185
DSL & IAD CLI Reference Guide