ZyWALL 5/35/70 Series User’s Guide
Table 39 WAN: Ethernet Encapsulation (continued)
LABEL | DESCRIPTION |
|
|
Retype to Confirm | Type your password again to make sure that you have entered is correctly. |
|
|
Login Server IP | Type the authentication server IP address here if your ISP gave you one. |
Address | This field is not available for Telia Login. |
| |
|
|
Login Server | Type the domain name of the Telia login server, for example login1.telia.com. |
(Telia Login only) |
|
Relogin | The Telia server logs the ZyWALL out if the ZyWALL does not log in periodically. |
Every(min) | Type the number of minutes from 1 to 59 (30 default) for the ZyWALL to wait |
(Telia Login only) | between logins. |
WAN IP Address |
|
Assignment |
|
Get automatically | Select this option If your ISP did not assign you a fixed IP address. This is the |
from ISP | default selection. |
Use Fixed IP | Select this option If the ISP assigned a fixed IP address. |
Address |
|
My WAN IP | Enter your WAN IP address in this field if you selected Use Fixed IP Address. |
Address |
|
My WAN IP | Enter the IP subnet mask (if your ISP gave you one) in this field if you selected Use |
Subnet Mask | Fixed IP Address. |
Gateway IP | Enter the gateway IP address (if your ISP gave you one) in this field if you selected |
Address | Use Fixed IP Address. |
Advanced Setup |
|
|
|
Enable NAT | Network Address Translation (NAT) allows the translation of an Internet protocol |
(Network Address | address used within one network (for example a private IP address used in a local |
Translation) | network) to a different IP address known within another network (for example a |
| public IP address used on the Internet). |
| Select this check box to enable NAT. |
|
|
RIP Direction | RIP (Routing Information Protocol) allows a router to exchange routing information |
| with other routers. The RIP Direction field controls the sending and receiving of |
| RIP packets. |
| Choose Both, None, In Only or Out Only. |
| When set to Both or Out Only, the ZyWALL will broadcast its routing table |
| periodically. |
| When set to Both or In Only, the ZyWALL will incorporate RIP information that it |
| receives. |
| When set to None, the ZyWALL will not send any RIP packets and will ignore any |
| RIP packets received. |
| By default, RIP Direction is set to Both. |
|
|
141 | Chapter 7 WAN Screens |