ZyWALL 5/35/70 Series User’s Guide

9.16.4 IEEE 802.1x + Dynamic WEP

Click the NETWORK and WIRELESS CARD to display the Wireless Card screen. Select 802.1x + Dynamic WEP from the Security list.

Figure 84 Wireless Card: 802.1x + Dynamic WEP

The following wireless LAN security fields become available when you select 802.1x + Dynamic WEP in the Security drop down list-box.

Table 58 Wireless Card: 802.1x + Dynamic WEP

LABEL

DESCRIPTION

 

 

Security

Select 802.1x + Dynamic WEP from the drop-down list.

 

 

ReAuthentication

Specify how often wireless stations have to resend user names and passwords in

Timer (Seconds)

order to stay connected. Enter a time interval between 10 and 65535 seconds.

 

If wireless station authentication is done using a RADIUS server, the

 

reauthentication timer on the RADIUS server has priority.

Idle Timeout

The ZyWALL automatically disconnects a wireless station from the wired network

(Seconds)

after a period of inactivity. The wireless station needs to enter the user name and

 

password again before access to the wired network is allowed.

Authentication

Click RADIUS to go to the RADIUS screen where you can configure the ZyWALL to

Databases

check an external RADIUS server.

Dynamic WEP

Select 64-bit WEP or 128-bit WEP to enable data encryption.

Key Exchange

 

Apply

Click Apply to save your changes back to the ZyWALL.

 

 

Reset

Click Reset to begin configuring this screen afresh.

 

 

Chapter 9 Wireless LAN

192