ZyWALL 5/35/70 Series User’s Guide
Figure 62 Advanced Setup
The following table describes the labels in this screen.
Table 44 Advanced Setup
LABEL | DESCRIPTION |
|
|
AT Command |
|
Strings |
|
Dial | Type the AT Command string to make a call. |
|
|
Drop | Type the AT Command string to drop a call. "~" represents a one second wait, for |
| example, "~~~+++~~ath" can be used if your modem has a slow response time. |
Answer | Type the AT Command string to answer a call. |
|
|
Drop DTR When | Select this check box to have the ZyWALL drop the DTR (Data Terminal Ready) |
Hang Up | signal after the "AT Command String: Drop" is sent out. |
AT Response |
|
Strings |
|
CLID | Type the keyword that precedes the CLID (Calling Line Identification) in the AT |
| response string. This lets the ZyWALL capture the CLID in the AT response string |
| that comes from the WAN device. CLID is required for CLID authentication. |
Called ID | Type the keyword preceding the dialed number. |
|
|
Speed | Type the keyword preceding the connection speed. |
|
|
Call Control |
|
|
|
Chapter 7 WAN Screens | 156 |