ZyWALL 5/35/70 Series User’s Guide

47.4.2 Restore Using FTP Session Example

Figure 373 Restore Using FTP Session Example

ftp> put config.rom rom-0 200 Port command okay

150 Opening data connection for STOR rom-0

226 File received OK

221 Goodbye for writing flash

ftp: 16384 bytes sent in 0.06Seconds 273.07Kbytes/sec. ftp>quit

Refer to Section 47.3.5 on page 611 to read about configurations that disallow TFTP and FTP over WAN.

47.4.3 Restore Via Console Port

Restore configuration via console port by following the HyperTerminal procedure shown next. Procedures using other serial communications programs should be similar.

1Display menu 24.6 and enter “y” at the following screen.

Figure 374 System Maintenance: Restore Configuration

Ready to restore Configuration via Xmodem.

Do you want to continue (y/n):

2The following screen indicates that the Xmodem download has started.

Figure 375 System Maintenance: Starting Xmodem Download Screen

Starting XMODEM download (CRC mode) ...CCCCCCCCC

3Run the HyperTerminal program by clicking Transfer, then Send File as shown in the following screen.

Figure 376 Restore Configuration Example

Type the configuration file’s location,

or click Browse to search for it.

Choose the Xmodem protocol.

Then click Send.

Chapter 47 Firmware and Configuration File Maintenance

616