ZyWALL 5/35/70 Series User’s Guide

The required fields in a command are enclosed in angle brackets <>.

The optional fields in a command are enclosed in square brackets [].

The symbol means “or”.

For example,

sys filter netbios config <type> <onoff>

means that you must specify the type of netbios filter and whether to turn it on or off.

48.1.2 Command Usage

A list of commands can be found by typing help or ? at the command prompt. Always type the full command. Type exit to return to the SMT main menu when finished.

Figure 386 Valid Commands

Copyright (c) 1994 - 2005 ZyXEL Communications Corp. ras> ?

Valid commands are:

exit

device

sys

ls

ether

poe

pptp

aux

config

ip

ipsec

ppp

bridge

bm

certificates

idp

av

as

cnm

8021x

radius

 

 

 

ras>

 

 

 

The following table describes some commands in this screen.

Table 233

Valid Commands

 

 

 

COMMAND

 

DESCRIPTION

 

 

 

sys

 

The system commands display device information and configure device settings.

 

 

 

exit

 

This command returns you to the SMT main menu.

 

 

 

ether

 

These commands display Ethernet information and configure Ethernet settings.

 

 

 

aux

 

These commands display dial backup information and control dial backup connections.

 

 

 

ip

 

These commands display IP information and configure IP settings.

 

 

 

ipsec

 

These commands display IPSec information and configure IPSec settings.

 

 

 

bridge

 

These commands display bridge information.

 

 

 

bm

 

These commands configure bandwidth management settings and display bandwidth

 

 

management information.

certificates

 

These commands display certificate information and configure certificate settings.

 

 

 

8021x

 

These commands configure 802.1x settings and display 802.1x information.

 

 

 

radius

 

These commands display RADIUS information and configure RADIUS settings.

 

 

 

625

Chapter 48 System Maintenance Menus 8 to 10