ZyWALL 5/35/70 Series User’s Guide

33.2.1 Configuring Dynamic DNS

To configure Dynamic DNS, set the ZyWALL to router mode in menu 1 or in the MAINTENANCE Device Mode screen and go to Menu 1 - General Setup and press [SPACE BAR] to select Yes in the Edit Dynamic DNS field. Press [ENTER] to display Menu 1.1 - Configure Dynamic DNS (shown next).

Figure 270 Menu 1.1: Configure Dynamic DNS

Menu 1.1 - Configure Dynamic DNS

Service Provider= WWW.DynDNS.ORG

Active= No

Username=

Password= ********

Edit Host= No

Press ENTER to Confirm or ESC to Cancel:

Follow the instructions in the next table to configure Dynamic DNS parameters.

Table 186 Menu 1.1: Configure Dynamic DNS

FIELD

DESCRIPTION

 

 

Service

This is the name of your Dynamic DNS service provider.

Provider

 

Active

Press [SPACE BAR] to select Yes and then press [ENTER] to make dynamic DNS

 

active.

Username

Enter your user name.

 

 

Password

Enter the password assigned to you.

 

 

Edit Host

Press [SPACE BAR] and then [ENTER] to select Yes if you want to configure a DDNS

 

host.

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to save your configuration, or press [ESC] at any time to cancel.

33.2.1.1 Editing DDNS Host

To configure a DDNS host, follow the procedure below.

1Configure your ZyWALL as a router in menu 1 or the MAINTENANCE Device Mode screen.

2Enter 1 in the main menu to open Menu 1 - General Setup.

3Press [SPACE BAR] to select Yes in the Edit Dynamic DNS field. Press [ENTER] to display Menu 1.1 - Configure Dynamic DNS.

4Press [SPACE BAR] and then [ENTER] to select Yes in the Edit Host field. Press

[ENTER] to display Menu 1.1.1 - DDNS Host Summary.

Chapter 33 SMT Menu 1 - General Setup

506