ZyWALL 5/35/70 Series User’s Guide

Figure 220 SSH Example 2: Test

$ telnet 192.168.1.1 22 Trying 192.168.1.1...

Connected to 192.168.1.1. Escape character is '^]'. SSH-1.5-1.0.0

2Enter “ssh –1 192.168.1.1”. This command forces your computer to connect to the ZyWALL using SSH version 1. If this is the first time you are connecting to the ZyWALL using SSH, a message displays prompting you to save the host information of the ZyWALL. Type “yes” and press [ENTER].

Then enter the password to log in to the ZyWALL.

Figure 221 SSH Example 2: Log in

$ ssh –1 192.168.1.1

The authenticity of host '192.168.1.1 (192.168.1.1)' can't be established.

RSA1 key fingerprint is 21:6c:07:25:7e:f4:75:80:ec:af:bd:d4:3d:80:53:d1.

Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '192.168.1.1' (RSA1) to the list of known hosts.

Administrator@192.168.1.1's password:

3The SMT main menu displays next.

27.10Secure FTP Using SSH Example

This section shows an example on file transfer using the OpenSSH client program. The configuration and connection steps are similar for other SSH client programs. Refer to your SSH client program user’s guide.

1Enter “sftp –1 192.168.1.1”. This command forces your computer to connect to the ZyWALL for secure file transfer using SSH version 1. If this is the first time you are connecting to the ZyWALL using SSH, a message displays prompting you to save the host information of the ZyWALL. Type “yes” and press [ENTER].

2Enter the password to login to the ZyWALL.

3Use the “put” command to upload a new firmware to the ZyWALL.

441

Chapter 27 Remote Management