ZyWALL 5/35/70 Series User’s Guide
Figure 274 Menu 2: Dial Backup Setup
Menu 2 - WAN Setup
WAN 1 MAC Address:
Assigned By= Factory default
IP Address= N/A
WAN 2 MAC Address:
Assigned By= Factory default
IP Address= N/A
Active= No
Port Speed= 115200
AT Command String:
Init= at&fs0=0
Edit Advanced Setup= Yes
Press ENTER to Confirm or ESC to Cancel:
The following table describes the fields in this menu.
Table 190 Menu 2: Dial Backup Setup
FIELD | DESCRIPTION |
|
|
| |
|
|
Active | Use this field to turn the |
|
|
Port Speed | Press [SPACE BAR] and then press [ENTER] to select the speed of the connection |
| between the Dial Backup port and the external device. |
| Available speeds are: |
| 9600, 19200, 38400, 57600, 115200 or 230400 bps. |
|
|
AT Command |
|
String: |
|
Init | Enter the AT command string to initialize the WAN device. Consult the manual of your |
| WAN device connected to your Dial Backup port for specific AT commands. |
Edit Advanced | To edit the advanced setup for the Dial Backup port, move the cursor to this field; |
Setup | press the [SPACE BAR] to select Yes and then press [ENTER] to go to Menu 2.1 - |
| Advanced Setup. |
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to save your configuration, or press [ESC] at any time to cancel.
34.5 Advanced WAN Setup
Note: Consult the manual of your WAN device connected to your Dial Backup port for specific AT commands.
Chapter 34 WAN and Dial Backup Setup | 512 |